Quick view 1/2 x 1/2 inch 90 degree elbow This fitting accepts the common 1/2" tubing used on many RHG water Systems. It is a 90 degree elbow. MSRP: Was: Now: $3.24 Add to Cart Compare
Quick view 1/2 x 1/2 inch Y Divider Splitter This is a 1/2 x 1/2 x 1/2 inch Y divider commonly used on RHG systems like the Caddy to split water from one tube off to 2 tubes. MSRP: Was: Now: $7.04 Add to Cart Compare
Quick view 1/2" Strain Relief Nut Replacement Nut for holding part number 62002 to H2Pro Manifolds. MSRP: Was: Now: $1.95 Add to Cart Compare
Quick view 1/2" x 1/4" Tee for TDS Meter Probes This is the fitting that goes on the end of the wiring of the inline TDS meters. It allows for attaching the 1/2" water tubing to the meters. MSRP: Was: Now: $7.57 Add to Cart Compare
Quick view 2.5 Inch Filter Wrench This is the filter wrench needed to open the 2.5 inch filter housings found on the Tucker Systems. MSRP: Was: Now: $8.65 Add to Cart Compare
Quick view 2.5" x 10" Filter Housing This is the sediment and carbon filter housing on the Tucker® RO/DI Mobile system as well as the Tucker® RO/DI Fill N Go tank systems. If you damaged yours, this is the replacement for it. 1/2" inlet and outlet. Does not include the filter or the... MSRP: Was: Now: $25.90 Add to Cart Compare
Quick view 4 Inch Filter Wrench This is the filter wrench needed to open the 4 inch filter housings found on the Tucker Systems. MSRP: Was: Now: $10.82 Add to Cart Compare
Quick view 4.5" x 10" Filter Housing This is the DI filter housing on the Tucker® RO/DI Mobile system as well as the Tucker® RO/DI Fill N Go tank systems. If you damaged yours, this is the replacement for it. 3/4" inlet and outlet. Does not include the filter or the housing wrench. MSRP: Was: Now: $70.25 Add to Cart Compare
Quick view 5 Port Pressure Regulator This is the replacement pressure regulator for the H2Pro System by RHG Products Company. Bolts into place on existing frames in the event your pressure regulator has failed. Accepts a pressure gauge to monitor performance. MSRP: Was: Now: $85.44 Add to Cart Compare
Quick view 5/16" Tubing Holder w/o-ring This is the replacement cartridge system for the male quick connect fitting for pole tubing as well as for the Tucker Ultra Valve system. MSRP: Was: Now: $3.95 Add to Cart Compare
Quick view Faceplate Adapter This is the replacement motor adapter for our brass pumps. MSRP: Was: Now: $48.67 Add to Cart Compare
Quick view GFCI Plug This is the original GFCI Plug that would have come with any of our electric booster pumps. If you have a need to replace yours this is the correct option. MSRP: Was: Now: $32.45 Add to Cart Compare
Quick view Handheld TDS Meter This digital handheld TDS meter measures not only the mineral content in your water, but also the water temperature. Handy for checking the purity of your water sysem to ensure spot free results. The temp reading is handy when you're trying... MSRP: Was: Now: $32.39 Add to Cart Compare
Quick view In-line TDS Meter - Dual Probe These dual probe TDS meters are great for measuring the water quality of multiple water lines. At the press of a button you receive a digital read out of your water quality. Auto shut off saves the battery life (turns off 10 seconds after last... MSRP: Was: Now: $91.93 Add to Cart Compare
Quick view In-line TDS Meter - Single Probe These single probe TDS meters are great for measuring the water quality of a single water line. At the press of a button you receive a digital read out of your water quality. Auto shut off saves the battery life (turns off 10 seconds after last... MSRP: Was: Now: $58.40 Add to Cart Compare
Quick view Inline Pressure Gauge Simple inline pressure gauge that will tell you the pressure of your incoming water pressure. On RO/DI systems best to install this prior to your RO. Either before your prefilters or after. Simple push fit into place on 1/2" tubing on all RHG /... MSRP: Was: Now: $49.95 Add to Cart Compare
Quick view No Flat Wheel Retrofit Kit If you're looking for an upgrade to the standard pneumatic wheels offered on many carts these are an incredible option. No flat wheels complete with all hardware needed to install. MSRP: Was: Now: $99.00 Add to Cart Compare
Quick view Pressure Gauge Replacement Pressure Gauge This guage is liquid filled and reads from 0-160 PSI. This is utilized on the following products. -110v Booster Pump System -110v H2Pro RO/DI System -Tucker® RO/DI Mobile System -Tucker® RO/DI Fill N Go Tank Systems MSRP: Was: Now: $32.45 Add to Cart Compare
Quick view Pressure Regulator If you damaged your pressure regulator on the 110v RO Booster System, this is the suitable replacement. MSRP: Was: Now: $37.85 Add to Cart Compare
Quick view PVC Housing Clamp This is a replacement PVC housing Clamp for many RHG Systems. MSRP: Was: Now: $14.01 Add to Cart Compare
Quick view PVC Housing Clamp - Squeeze This is a replacement PVC housing Clamp for many RHG Systems. MSRP: Was: Now: $27.04 Add to Cart Compare
Quick view Replacement Air Filled Wheel This is the wheel that we use at RHG for all of our mobile purification systems. If you need a replacement for your RHG system, this is the one. MSRP: Was: Now: $19.47 Add to Cart Compare
Quick view Replacement Float for Fill n Go Replacement float for Fill N Go Systems 1/2" female NPT inlet MSRP: Was: Now: $71.40 Add to Cart Compare
Quick view Replacement O-ring for Tucker® DI Housing This is the replacement o-ring for the grey housing on the Tucker® RO/DI Cart as well as the Fill N Go System. MSRP: Was: Now: $23.79 Add to Cart Compare
Quick view Replacement Wheel Axel Bolt This is the replacement axel bolt for our Tucker® RO/DI carts. One per wheel. Sold individually MSRP: Was: Now: $11.88 Add to Cart Compare
Quick view RHG PVC Housing - 21 Inch This is the RHG 21" PVC Water filter housing. Inlet and outlet ports are 1/2" female NPT. This housing works with carbon filters, DI filters, and RO membranes. Features an easy to open lid with built in tool for servicing. MSRP: Was: Now: $140.54 Add to Cart Compare
Quick view RHG PVC Housing - 40 Inch This is the RHG 40" PVC Water filter housing. Inlet and outlet ports are 1/2" female NPT. This housing works with carbon filters, DI filters, and RO membranes. Features an easy to open lid with built in tool for servicing. Suitable replacement... MSRP: Was: Now: $151.36 Add to Cart Compare
Quick view Serviceable Housing Insert w/ all o-rings Made of a strong molded plastic material this cap is for our RHG PVC Filter housings. Comes standard with 1/2" Female NPT threaded connections. Both holes are drilled for use with our RO Membranes. If you intend to use this for a carbon or DI... MSRP: Was: Now: $27.04 Add to Cart Compare
Quick view Stainless Steel U-Pin This is the retaining U-Pin for the RHG Filter Housings found on many of the spot free water systems in the industry. MSRP: Was: Now: $21.63 Add to Cart Compare
Quick view Tucker® Caddy Inlet/Outlet Replacement inlet and outlet for EZ Pure Caddy System. Includes the tube, PTF connection, and brass garden hose fittings. MSRP: Was: Now: $32.45 Add to Cart Compare
Quick view Tucker® Caddy Outlet Replacement outlet for EZ Pure Caddy System. Includes the tube, PTF connection, and brass garden hose male fitting. MSRP: Was: Now: $16.22 Add to Cart Compare
Quick view 12volt Waterproof on/off switch These 12volt on/off waterproof switches are used on our 12volt booster pump systems and Tucker® Fill N Go tank systems. MSRP: Was: Now: $64.84 Add to Cart Compare
Quick view Plastic Ball Valve 1/2" 1/2" Push to fit ball valve. NEW and IMPROVED MSRP: Was: Now: $28.35 Add to Cart Compare
Quick view Replacement Plastic Bypass Valve This is the replacement bypass valve for the EZ Pure Caddy and many of the Tucker® RO/DI carts. NEW and IMPROVED MSRP: Was: Now: $28.35 Add to Cart Compare
